Floating skimmer and fountain in one

With just one device you get a skimmer and floating fountain for your pond. Thanks to the skimmer, leaves and twigs will quickly be sucked up and collected in the net. With the fountain function you have a beautiful fountain in the middle of your pond. You can use the set in skimmer mode or fountain mode. In skimmer mode, only the skimmer function will be on. In fountain mode, the fountain is on and the skimmer is partially active. So you can easily alternate: in summer a beautiful fountain and in autumn a skimmer against all falling leaves!

Fountain set with three different fountain heads

Alternate your fountain set with the three different included fountain heads. This allows you to create an always different fountain image for your pond. A pond that never gets boring! You change them easily by turning off the pump, unscrewing the fountain head and mounting a new fountain head. This way you can enjoy a beautiful ambience again!

Automatic drainage of surface debris in your pond

With a skimmer you never again have to use a scoop net to fish surface dirt out of the water in your pond. A skimmer helps you day and night to drain surface water and send it via a pump directly to your filter.

The surface is cleaned of large debris and the water is filtered. This is how you get rid of both large and small debris. All you have to do is occasionally empty the net in the skimmer of leaves and other large debris.

No more excess debris from unwanted surface debris

When leaves, branches, insects and other debris fall into your pond, they often descend to the bottom over time. Here they will decompose and cause an increase in waste products in your pond. This can cause additional pollutants and algae formation. Especially in the fall you can get a lot of trouble from many falling leaves.

A skimmer automatically drains all this extra dirt, so it has no chance to form extra waste in your pond. This keeps your pond cleaner and healthier without you having to put in a lot of effort.

Easy to install and position with anchor rope

Placing and installing the floating BluSkimmer 2,500 is easy because it floats and is so positionable. You can easily anchor the BluSkimmer with supplied nylon ropes and anchor points. This allows you to place the BluSkimmer in the desired location. The BluSkimmer will float there and you can then enjoy the skimmer or fountain function.

Suitable for all pond depths from 35cm

Because the skimmer floats it works in both deep and shallow ponds. The skimmer must float at a pond depth of at least 35cm.

Suitable for ponds up to 40m2

The BluSkimmer can process up to 2,500 liters of water per hour. The large range makes it suitable for ponds with an area up to 40m2.